drop-in circulators & isolators miniaturized drop-in circulators & isolators 15-14 vol. 1 sales offices: visit our web site at http://www.temex.net temex has designed a line of miniaturized drop-in circulators and isolators covering the frequency ranges from 75 mhz to 18 ghz . these circulators and isolators are designed to be used for applications where space saving and magnetic shielding are required, to avoid any detuning when operating close to magnetic ?ld or ferrous materials: - cellular applications such as nmt , amps , ct-1 , ct-2 , tacs , e-tacs , gsm , jdc , dect , dcs , pcs, wlan and any communication base stations: tfts , inmarsat etc . - broadcasting applications: dab , etc. - microstrip sub-systems - airborne equipment - missiles - radars / phase array antennas - satellite pay loads - earth stations circulators and isolators are available under standard packages with ?tandard inch?dimensions. isolators integrate the load which is: up to 60 w-cw power handling capability for vhf/uhf bands, 1 w-cw power handling capability for microwave frequency bands. for microwave applications, circulators are available in round package. isolators are available in ?nge type package with or without through mounting holes. depending on the requested isolation, one or two cell designs are available in the vhf/uhf band as standard packages. the drop-in design allows easy and fast installation into stripline and microstrip assemblies with mounting screws or soldering with conductive epoxy glue. test jigs for different packages are available for customer s incoming inspection. miniaturized drop-in circulators & isolators 3 2 lc3201-01 n xxx 1 nda110-02 3 2 n xxx 4 1
drop-in circulators & isolators miniaturized drop-in circulators & isolators 15-15 vol. 1 sales offices: visit our web site at http://www.temex.net 3-port circulators & isolators model frequency isolation insertion v.s.w.r. power case operating range (db) loss (db) (w-cw) temperature circulator isolator (mhz) typ. min. typ. max. max. input load* c nb3040 nb1040 380-430 22 20 0.3 0.4 100 60 t58 -10 to +55 nc3104 nc1104 890-960 23 20 0.3 0.4 1.25 100 60 t42 -10 to +55 nc3106 nc1106 920-960 25 20 0.3 0.4 1.25 100 60 t42 -10 to +55 nd3100 nd1100 1030-1090 22 20 0.3 0.5 1.25 100 10 t42 -10 to +55 nd3141 nd1141 1270-1400 22 20 0.3 0.5 1.25 30 3 t42 -10 to +55 nd3161 nd1161 1452-1492 22 20 0.3 0.4 1.25 30 0.3 t42 -10 to +55 nd3162 nd1162 1525-1661 22 20 0.3 0.5 1.25 30 3 t42 -10 to +55 nd3183 nd1183 1710-1785 22 20 0.3 0.4 1.25 30 3 t44 -10 to +55 nd3184 nd1184 1805-1880 22 20 0.3 0.4 1.25 50 50 t44 -10 to +55 nd3181 nd1181 1805-1880 23 20 0.3 0.4 1.25 50 50 t42 -10 to +55 nd3186 nd1186 1930-1990 23 20 0.3 0.4 1.25 50 50 t44 -10 to +55 nd3182 nd1182 1930-1990 23 20 0.3 0.4 1.25 50 50 t42 -10 to +55 NE1101 2100-2300 23 20 0.3 0.4 1.25 10 1 t44 -10 to +55 ne1120 2300-2500 23 20 0.3 0.4 1.25 10 1 t44 -10 to +55 ne1130 2700-2900 23 20 0.3 0.4 1.25 150 15 t44 -30 to +70 nf1100 2700-3100 23 20 0.4 0.5 1.3 150 15 t44 -30 to +70 ng3142 5400 - 5900 22 20 0.3 0.4 1.22 1 1 t53 -30 to +70 ng3140 ng1140 5650 - 5850 25 23 0.3 0.4 1.25 10 1 t45 -30 to +70 nj1101 7900 - 8400 20 17 0.5 0.6 1.50 10 1 nj1 -40 to +85 nj1111 8500 - 9500 20 17 0.6 0.7 1.50 10 1 nj1 -40 to +85 nj1139 9820- 12600 18 16 0.6 0.7 1.45 1 1 nj1 -40 to +85 nj3130 11000- 11500 22 20 0.4 0.5 1.25 20 nj3 -40 to +85 nj3151 13000- 14000 22 20 0.4 0.5 1.25 30 nj3 -40 to +90 nj1140 13000- 14000 22 20 0.6 0.8 1.50 10 2 nj1 -45 to +125 nj1161 14000- 14500 22 20 0.5 0.6 1.25 20 1 nj1 -45 to +125 nj1162 14500- 15500 22 20 0.5 0.6 1.50 10 1 nj1 -40 to +85 nj1160 15500 - 16000 22 20 0.5 0.6 1.50 10 1 nj1 -40 to +85 * notes: ? for an isolator: power of the integrated load, 10 w-load optional, ? for a circulator: re?ected power handling capability.
drop-in circulators & isolators miniaturized drop-in circulators & isolators 15-16 vol. 1 sales offices: visit our web site at http://www.temex.net l a b d c w a/2 4x through holes circulator 0,64 .025 n xxx l a b d c w 4x through holes circulator 0,64 .025 n xxx h g e f 1.78 070 0.1 .004 t42 25.4 circ.: 25.4 7.62 20.83 20.83 15.36 7.75 3.81 0.64 1.78 2.1 iso.: 31.75 max. t44 19.05 circ.: 19.05 6.35 14.50 14.50 10.57 6.20 3.13 0.64 1.78 2.03 iso.: max. 25.4 t45 12.7 circ.: 12.7 6.35 9.65 9.65 6.85 4.32 3 0.63 1.8 1.9 or iso.: max. 12.7 m2.5 t54 51.5 51.5 12 41.8 41.8 34.15 12.5 3.5 2 1.75 3.3 iso.: max. 51.5 m2.5 t58 51 51 19 42 42 34 12.5 4.2 0.5 7 3.5 iso.: max. 51 outline drawings 3-port circulators & isolators dimensions in mm t42 - t44 - t45 - t54 - t58 series case l w h a b c d e f g holes
drop-in circulators & isolators miniaturized drop-in circulators & isolators 15-17 vol. 1 sales offices: visit our web site at http://www.temex.net bb xxxx-xx n xxx 47.51 1.870 2 3 .118 45 1.722 2.5 .098 15 .591 25 984 50 0.25 1.969 010 t50 series ba1032-xx n ? bts 2 trs. 3 d ? bts 20 5 t52 series 9.52 0 120 t53 series 1 .039 4.6 .181 max 1.7 2.2 + 0.1 0 .098 + .020 - .039 2.5 + 0.5 - 1 .087 + .004 - .000 nj1-series 120 6.35 0 -0.05 250 + 000 - 002 l = 0.5 020 1.27 nj3-series 1.58 54.1 5.4 34.75 6 e 3.5 t0 series
drop-in circulators & isolators miniaturized drop-in circulators & isolators 15-18 vol. 1 sales offices: visit our web site at http://www.temex.net case l w h a b c d e f g holes p42 50.8 25.40 7.62 46.23 20.83 15.36 7.75 3.81 3.81 3.81 2.1 p44 38.1 19.05 6.35 33.50 14.50 10.57 6.35 2.00 2.00 2.00 2.5 nc4112 920-960 46 40 0.4 0.7 1.20 1.25 100 p55 -10 to +55 c nc4116 920-960 46 40 0.4 0.7 1.20 1.25 100 p42 -10 to +55 c nd4112 1805-1880* 46 40 0.4 0.7 1.20 1.25 100 p55 -10 to +55 c nd4224 1805-1880* 46 40 0.4 0.7 1.20 1.25 100 p44 -10 to +55 c nd4117 1805-1880* 46 40 0.4 0.7 1.20 1.25 100 p42 -10 to +55 c *also available in 1930-1990 mhz band. customized devices available 4-port circulators model frequency isolation insertion v.s.w.r. power case operating range (db) loss (db) (w-cw) temperature circulator (mhz) typ. min typ. max typ. max input dimensions in mm 3 2 n?xx 4 1 4 x holes b l a w 0.64 .025 d c h g e f 1.78 .070 0.1 .004 p42 - p44 series p55 series (all fixation holes) how to order? please specify: ? model number, ? center frequency and desired bandwidth, or frequency range, ? direction of circulation (clockwise or counter clockwise). test jig drop-in miniaturized circulators and isolators are measured in custom designed test jigs, in order to simulate operating environmental conditions. special customer application and environmental details must be speci?d when ordering, to avoid correlation problems between temex tests and customer results.temex test jig is recommended to verify product performances. outline drawings
|
